Konica Minolta bizhub PRESS 1052 User Manual Download Page 165

Page: 165 / 540

bizhub PRESS 1250/1052

5-41

5.10

Replacing Waste Toner Box

5.10

Replacing Waste Toner Box

When the waste toner box becomes full with used toner, the following message/indicator will be displayed
on the screen.

Follow the procedure below to replace the waste toner box.

NOTICE

Do not withdraw the waste toner box while printing is in progress. Otherwise, machine trouble may be
caused.

Message area

Supply/Scrap Parts area

Machine status

Machine Screen:
Ready to print
Exchange of waste toner box is
due
Copy Screen:
Ready to copy
Exchange of waste toner box is
due

[Waste toner near-full] appears
and the indicator lights in red.

The waste toner box has collect-
ed considerable amount of used
toner and becomes due for re-
placement.

Machine Screen:
Ready to print
Waste toner box is full
Copy Screen:
Ready to copy
Waste toner box is full

[Waste toner box full] appears
and the indicator lights in red.

The waste toner box is full with
used toner.

Waste toner box is full
Please exchange waste toner
box

[Waste toner box full] appears
and the indicator lights in red.

The machine becomes unavaila-
ble for printing due to the waste
toner box full of used toner.

Summary of Contents for bizhub PRESS 1052





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for bizhub PRESS 1052

Reviews:

Related manuals for bizhub PRESS 1052

Brands by name

Popular brands

Konica Minolta bizhub PRESS 1052, User Manual

Search results

Summary of Contents for bizhub PRESS 1052

Reviews:

Related manuals for bizhub PRESS 1052

Brands by name

Popular brands