Konica Minolta bizhub PRESS 1052, User Manual

Page: 422 / 540

bizhub PRESS 1250/1052 9-19
9.3 Schedule 9
The display scale can be changed within the following range.
9.3.3 Operating Paper Setting Dialog via Operation Dialog
This section describes how to display the operation dialog on the Schedule Screen in order to operate the
paper setting dialog.
0
You cannot exit the Schedule Screen with the operation dialog and paper setting dialog displayed. To
exit the Schedule Screen, press [x] in the upper-right corner of the dialog to make it disappear from the
screen.
1
Follow the procedure on page 9-17 to display the Schedule Screen.
2
Select the desired bar from the job bar display.
The operation dialog and paper setting dialog for the job indicated by the selected bar will be displayed.
3
Use the right and left arrow keys of [Job Reselect] to display the paper setting dialog of the desired job.
%
Pressing [->] changes the paper setting dialog to that of the next job. When it comes to the last job,
[->] becomes grayed out to show inactivity.
%
Pressing [<-] changes the paper setting dialog to that of the previous job. When it comes to the first
job, [<-] becomes grayed out to show inactivity.
4
If the selected job uses more than one tray, use the up-down arrow keys of [Tray Select] to switch the
paper setting dialog of the job from one tray to another.
Unit of time-line Available range using [-]/[+]
Timetable 30 minutes later to 24 hours later
Time Frame (H/M) 10 minutes to 24 hours