Konica Minolta bizhub PRESS 1052, User Manual

Page: 77 / 540

bizhub PRESS 1250/1052 2-63
2.6 Making User Authentication/Account Track 2
%
The screen shown below requires a user name, user password, account name, and account pass-
word.
%
Press [Public User], if displayed in the upper right area of the screen as shown below. You are al-
lowed to use the machine without any entry or use of an IC card required for authentication.
2
Press [OK], or press Access on the control panel .
The screen you attempt to access will be displayed.
%
The message [Copy limit reached] may be displayed and the machine may become unavailable.
Please contact your administrator.
%
Even if the authentication is successfully made, some of [Copy], [Scan], [Print], [Recall] functions
may not be allowed by the administrator. Please contact your administrator.
3
Start operation.
You can use the machine normally.
%
When the reset function is activated, the Machine Screen will be displayed. You need to gain au-
thentication again when accessing screens that require authentication.
4
When machine operation is completed, press Access on the control panel .
The authentication screen will be displayed and it will no longer accept any operation.
2.6.2 User Authentication Using IC Card
This section describes the operation to gain user authentication by using an IC card.
0
The machine can be set to authenticate a user by holding an IC card over Authentication Unit (IC Card
Type) AU-201 . In this case, the machine may also be set to require an entry of user password for au-
thentication.