Konica Minolta bizhub 601, User Manual

Page: 260 / 538

751/601 6-15
Copy paper/originals 6
– Make sure that [X] is selected, touch
[↔]
to switch between the integer and the fraction, and then
touch [–] and [+] to type in the length of side X. (5-1/2 inch to 18 inch)
– Make sure that [Y] is selected, touch [
↔
] to switch between the integer and the fraction, and then
touch [–] and [+] to type in the length of side Y. (3-15/16 inch to 12-5/16 inch)
– If a decimal value is displayed in the Custom Size screen, use the keypad to type in the setting. For
details on switching between decimal and fraction values, refer to
"System Settings" on
page 11-15
.
– If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears. Type a value within the allowable range. If the value was
incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.
To cancel changes to the settings, touch [Cancel].
6
Touch the memory button where the paper size is to be stored.
– To change the name of a memory key, touch [Change Custom Size Name], and then touch the key
to be renamed.