manualshive.com logo in svg

Konica Minolta bizhub 601, User Manual

Share
Download
Konica Minolta bizhub 601 User Manual Download Page 178

751/601

3-22

Additional copy operations

3

The System Auto Reset Confirmation screen appears.

3

Touch the button for the desired display time.

–

To not display the message requesting confirmation to exit Enlarge Display mode, touch [No].

–

To display the message requesting confirmation to exit Enlarge Display mode, touch the button ([30 
second], [60 second], [90 second] or [120 second]) for the length of time that the message is to be 
displayed.

–

To cancel changes to the settings, press the [Reset] key. All changes to the settings are canceled.

4

Touch [OK].

The Accessibility Setting screen appears again.

5

Touch [Close] or press the [Accessibility] key.

The Basic screen appears again.

2

Note 

The Enlarge Display mode is compatible with basic copy, scanning and fax functions. With the Enlarge 
Display mode, text and illustrations are displayed at a larger size so that they can be seen more easily. 
For details, refer to the User’s Guide [Enlarge Display Operations].

As the factory default, "No" is selected.

3.7.5

Setting the "Auto Reset Confirmation" function

When the automatic panel reset operation is performed in Enlarge Display mode, a message can be 
displayed, allowing you to choose either to continue operating without resetting the current settings or to 
reset the settings.

In addition, it is possible to specify when the message is displayed, requesting confirmation to reset the 
settings in Enlarge Display mode.

Summary of Contents for bizhub 601



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands