Konica Minolta bizhub 601, User Manual

Page: 164 / 538

751/601 3-8
Additional copy operations 3
3.4 Registering copy programs (Mode Memory)
Frequently used copy settings can be stored together as a program to easily be recalled. A maximum of 30
programs can be registered.
A name of up to 16 characters can be specified for the registered copy programs.
2
Note
If the optional hard disk is installed, a maximum of 100 copy programs can be registered.
1
Using the touch panel and control panel keys, specify the copy settings to be registered in the copy
program.
? Can the current settings be checked?
% To check the currently specified copy settings, touch [Check Job] in the left panel, and then touch
[Job Details]. For details, refer to
"Checking the Copy Settings (Check Job)" on page 3-2 .
2
Press the [Mode Memory] key.
The Recall Copy Program screen appears.
3
From the copy program buttons that appear in the screen, touch the button where you wish to store
the copy settings, and then touch [Register Program].
– There are three Recall Copy Program screens. Touch [
↑
] and [
↓
] to display a different screen.
– If 30 copy programs have been registered, delete an unnecessary copy program. For details on
deleting copy programs, refer to
"Deleting a copy program" on page 3-10
.
The Register Copy Program screen appears.
4
Use the control panel keypad and the keyboard that appears in the touch panel to type in the name of
the copy program.
– The program name can contain a maximum of 16 characters.