Konica Minolta bizhub 25e, Field Engineering Manual

Page: 78 / 353

3-2
Service Program Explanation Operation Page
Network switch mode Adjust the network parameter. <Mode>, <*>, <5>, <1> 3-102
Coverage measure-
ment You can scan and check the black ratio of a
document. <Mode>, <*>, <5>, <4> 3-105
Touch panel adjust-
ment Correct the X, Y on the touch panel. <Mode>, <*>, <5>, <6> 3-106
Printer control param-
eter mode Adjust functions of print controller. <Mode>, <*>, <5>, <7> 3-107
Network capture You can capture the packet data the machine
has sent and received. <Mode>, <*>, <5>, <8> 3-111
Storage maintenance This mode is used to erase data the SD memory
card on the main control board.
<Mode>, <*>, <5>, <9> 3-112
Initialize protection Use this function to initialize protect passcode
and administrator’s password. <Mode>, <*>, <6>, <1> 3-113
Color fine adjustments Adjust the scan color. You can adjust RGB
mode for front side of document, and make fine
difference for back side of document.
<Mode>, <*>, <6>, <2> 3-114
AS400 batch settings All AS400 related settings will turn on using this
function. <Mode>, <*>, <6>, <3> 3-114
Certification terminal Enable this setting to use the certification termi-
nal.
<Mode>, <*>, <6>, <5> 3-115
Service function menu All the field service program modes are available
from the menu.
<Mode>, <*>, <7>, <7> 3-115
Counter information
maintenance The machine has the counter data saved on both
the EEPROM and SD card with its serial number
connected. If for some reasons these two serial
numbers do not match, maintenance the data
manually. <Mode>, <*>, <9>, <3> 3-115
RDS data copy This mode enables you to import and export
binary data including machine settings. <Mode>, <*>, <9>, <4> 3-116
Asset number This mode is used to input the asset number. <Mode>, <*>, <9>, <5> 3-116
Update the firmware Update main ROM, optional print controller ROM
and network board ROM using this mode. <Mode>, <*>, <9>, <8> 3-117
Quick Initial settings You can do the following setting with continu-
ously:
1. Initial settings
2. Consumable order sheet <Mode>, <*>, <9>, <9> 3-116