Konica Minolta bizhub 25e, Field Engineering Manual

Page: 214 / 353

4-8
Phase Error code
Detail
Error code
Description Journal Redial Message Note
Rx Phase B R.1.1 2011 T1 time-out error No, if no
page is
received
at auto
reception No Confirm the remote fax. Occurs at manual
reception.
R.1.2 2012 Compatibility error Yes No Confirm the remote fax.
2100 The receiver is a product of other
maker at closed communication Closed Tx Err. Remote fax is not compatible.
2101 No pass code received at closed
communication Close Rx error. No passcode stored in remote fax.
2102 The receiver has no pass code field
at closed communication Close Rx error. Passcode unmatched.
2107 Cannot adjust communication data
rate Confirm the remote fax. Normally, this error does
not occur.
2108 Cannot adjust communication code
(MH, MR, MMR)
2109 Cannot adjust communication code
(Normal, fine, super fine)
210A Cannot adjust ECM mode
210B Cannot adjust document width
210C Cannot adjust minimum
communication time
210D Cannot adjust document length
210E Cannot receive standard frame Confirm the remote fax.
210F Out-of -paper reception buffer error Out of paper reception is full.
2118 Reception rejected while printing
documents
2119 Cannot delete document for
overwrite at overwrite mode Machine error. Normally, this error does
not occur.
211A
Cannot update Flash ROM through
communication Reception was stopped.
211B Cannot fast remote diagnose No High-speed RDS. Cannot receive data.
R.2.3 2023 No answer to FTT Confirm the remote fax.
Rx Phase C R.3.1 2031 No answer to CFR
DCN received Yes No Confirm the remote fax.
R.3.3 2033 Hang up
Continuous error line detected Reception was stopped.
R.3.4 2034 DCN received to TT Cannot receive with minimum speed.
R.3.6 2036 FRTN output Some pages are not received correctly.
R.4.4 2044 Memory overflow Memory over.
R.4.1 2041 Too long document received Received doc. is not able to receive. Document over 3m