Konica Minolta bizhub 25e, Field Engineering Manual

Page: 124 / 353

3-48
3.5.2 Clearing the unique switches
Resets the unique switches to factory defaults.
1. From standby, press <Mode>, <*>, <0>, <4>.
2. Press [Switch Clear].
3. Press [Yes]. The unique switches will reset to factory defaults.
4. Press <Reset> to return the machine to standby.
3.5.3 List
000
•
Congestion tone detection
001
•
Enable the first tone key
•
Enable the second tone key
•
Enable the dial prefix key
003
•
Display only direct input number on redial list
•
The period before detecting busytone after dialing
010
•
Including TTI inside the document
•
The number of times PPR is detected during ECM transmission
013
•
Encoding method for transmission
015
•
Returns from V28 to V8
•
V.8 handshake in real time Tx
017
•
JBIG transmission
018
•
Disconnect the line when the transmission speed falls down under
7200 bps
•
Disconnect the line when the transmission speed falls down under
4800 bps
•
Transmission when disable to detect first NSF in real time transmis-
sion
019
•
Number of redial times for archive transmission
020
•
Transmit CED signal
•
Printout the pages completed to receive during receiving into memory
021
•
TCF check time (in 100 ms units)
022
•
Document storage method
•
MMR reception
•
JBIG reception
023
•
Encoding method for reception
029
•
Displays the message “No Network Connection.”
030
•
3429 baud symbol rate when communicating at V.34
•
3200 baud symbol rate when communicating at V.34
•
3000 baud symbol rate when communicating at V.34
•
2800 baud symbol rate when communicating at V.34
•
2400 baud symbol rate when communicating at V.34
032
•
ANSam output time
035
•
Reception level at CED 2100 Hz
037
•
The timing between V.34 handshake signals
050
•
Smooth printing for printing normal document
051
•
Give priority to “fit to paper”
052
•
Printing margin adjustment