manualshive.com logo in svg

Konica Minolta bizhub 25e, Field Engineering Manual

Share
Download
Konica Minolta bizhub 25e Field Engineering Manual Download Page 282

5-32

DISPLAY LCD B/W

1.  Remove the Cover platen. (See “COVER PLATEN” on page 5-23.)
2.  Remove the Cover top FBS. (See “CIS” on page 5-27.)
3.  Remove the PCB panel assy. (See “PCB PANEL ASSY” on page 5-30.)
4.  Remove the PCB PANEL. (See “PCB PANEL” on page 5-31.)
5.  Remove the Knob volume [1].
6.  Remove the film harness [2].
7.  Disconnect the connector [3] and the film harness [4] on the back side.
8.  Remove four hooks [5] then remove the Bracket LCD MID [6].

>@

>@

>@

>@

>@

>@

>@

>@

>@

9.  Remove two screws [7].
10. Remove the DISPLAY LCD B/W [9] while releasing two hooks [8].

>@

>@

>@

>@

>@

CAUTION

•  Handle the LCD gently to avoid from breaking it.

•  If the LCD breaks and the liquid comes into contact with your hands, rinse with water. If you have 

contact with your eyes or mouth, rinse with water and consult a physician.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands