manualshive.com logo in svg

Konica Minolta bizhub 25e, Field Engineering Manual

Share
Download
Konica Minolta bizhub 25e Field Engineering Manual Download Page 79

3-3

3.2 Machine parameter adjustment

3.2.1 Setting the machine parameters

These switches are used to program internal machine parameters.

1. From standby, press <Mode>, <*>, <0>, <0>.

2. Press [Edit Parameters].

3. Call up the desired switch by pressing [Prev] or [Next] , or by pressing the numeric keys.

4. Select the desired parameter by pressing the box.

5. To navigate through the machine parameter settings:

• 

The bits are ranged from 7 (left) to 0 (right).

• 

Press [ ] or [ ] of the cursor key to move the cursor.

• 

Press <0> or <1> on the numeric keys, or

 [ ] or [ ], to change the bit value.

• 

Press [Enter] to save the setting of the displayed parameter and return to the machine parameter 

edit screen.

• 

Press [Back]

 

not

 to save the setting of the displayed parameter.

6. If you want to set other machine parameters, repeat step 3-5. Otherwise, proceed to step 7.

7. Press <Reset> to return the machine to ready screen.

You can confirm the setting on a list.  The machine parameters list will be printed by pressing [List Pa-

rameter] in step 2.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands