Konica Minolta bizhub 25e, Field Engineering Manual

Page: 96 / 353

3-20
3.3.4 Details
Memory switch 00x : Dialer
Memory switch 000 :
bit
Initial
Setting
Adjust Usage / Comments
7 0 Factory use only —
6 0 Factory use only —
5 0 CED detection condition Sets whether the detection should be strict not.
Normal   Strict
350 ms 500 ms 700 ms 1000 ms
Switch 5 0 0 1 1
4 0 1 0 1
4 0
3 0 DIS detect time after dialing
0 : 55 sec
1 : 70 sec
Sets the DIS signal is detected after dialing a number.
2 1 CED detection
0 : No
1 : Yes
Can be use to ignore CED detection if noise on the telephone
line is mistaken as a 2100 Hz CED signal.
1 0 Factory use only —
0 0 Phone line type for the first
phone line
0 : PSTN
1 : PBX
When set to PSTN, the machine checks for dial tone and acts
according to the setting of memory switch 000, bit "1" . When
set to PBX, the machine always dials a given number of sec-
onds after going off-hook. Memory switch 001 sets the number
of seconds.