Konica Minolta bizhub 25e Field Engineering Manual Download Page 217

Page: 217 / 353

4-11

Internet FAX reception result

Error code

Descrpition

Countermeasure

The MFP is not compatible with the e-mail
attached image.

Ask the sender to send an internet fax in a compatible file format.

The MFP refused to forward the received
e-mail.

•Torespondtotheforwardrequest,set“ResponsetoFaxForwardingRequest”inE-mailSettings>OptionalE-mail

Settings.

•Check“E-mailaddressordomainnamethatwillacceptforwardedtransmission”at“ResponsetoFaxForwardingRequest”

inE-mailSettings>OptionalE-mailSettings.

Cannot access to POP3 server.

CheckthatPOP3ServerAddress,POP3PortNumber,SSL,andPOP3SPortNumberissetcorrectlyinE-mailSettings>

SMTP/POP Settings.

No response from POP3 server.

Check the DNS server address in TCP/IP setting.

CheckthefollowingitemsaresetcorrectinE-mailSettings>SMTP/POPSettings:POP3serveraddress,POP3portnum

ber,SSLusage,andPOP3Sportnumber.

POP3 server authentication failed.

CheckthefollowingitemsaresetcorrectinE-mailSettings>SMTP/POPSettings:Authenticationmethod,POP3user
name,andPOP3userpassword.

Result of the reception error

Code

Display and history

Description

(No message)

Themailwasreceived,andprocessedsuccessfully.

Fax forwarding

FAX forwarded.

Error E-mail (MDN)

Anerroroccurred,andrepliedtotheMDN.

Error E-mail (Forwarding)

Anerroroccurred,ande-mailisforwarded.

Error E-mail (Reply)

Anerroroccurred,andane-mailisreplied

Error E-mail (Notice)

Anerroroccurred,andannotificationissent.

Error E-mail (Size over)

Anerroroccurred,andoversizenotificationissent.

Erase

The e-mail was deleted.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Search results

Summary of Contents for bizhub 25e

Reviews:

Brands by name

Popular brands

Konica Minolta bizhub 25e, Field Engineering Manual

Search results

Summary of Contents for bizhub 25e

Reviews:

Brands by name

Popular brands