manualshive.com logo in svg

Konica Minolta bizhub 25e, Field Engineering Manual

Share
Download
Konica Minolta bizhub 25e Field Engineering Manual Download Page 196

3-120

3.42.3 About error

If an error occurred during updating, a five-digit error code will be displayed.

Code

Cause / Countermeasure

11000

General error.

11020

Start error detected.

11030

Could not find the ROM file. Check the specified file.

11040

USB memory read error. Check the USB memory is working correctly.

11050

Network board read error. Check the network boar is working correctly.

11060

File read error. Check that the ROM file are stored correctly.

11070
11080
11200

The machine is in use. Update when the machine and the memory are free.

11400

Could not find the ROM file. Check the specified file.

12030

Unable to update. Check the main control board is working correctly.

Start error (1020)

The detailed error code will be displayed when you press <Mode>, <*>, <9>, <8>. The four-digit numbers in 

the parenthesis is the detailed errors for start error.

Third digit error code

Code

Cause / Countermeasure

0020

Fax is in use. (Reserved communications are existing.)

0080

Memory is in use.

00A0

Fax and memory are in use.

Last digit error code

Code

Cause / Countermeasure

0000

No information

0001

Machine is operating.

0002

Machine is printing.

0003

Machine is operating and printing.

0004

Machine is scanning.

0005

Machine is printing and scanning.

0006

Machine is operating and scanning.

0007

Machine is operating, printing, and scanning.

0008

Machine is communicating.

0009

Machine is operating and communicating.

000A

Machine is printing and communicating.

000B

Machine is operating, printing, and communicating.

000C

Machine is scanning and communicating.

000D

Machine is operating, scanning and communicating.

000E

Machine is printing, scanning and communicating.

000F

Machine is operating, printing, scanning and communicating.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands