Konica Minolta bizhub 25e Field Engineering Manual Download Page 239

Page: 239 / 353

4-33

4.6 Scanner related trouble

Mechanical Errors

Symptom

Possible Cause

Countermeasure

While
feeding a
document

ADF does not feed the
document.

The pickup roller is dirty or worn
out.

Clean the roller.
Replace the roller.

The power of the separation
roller is getting decrease. The
separation pad pressure does
not match the paper quality.

Adjust the separation pressure.
Clean the roller.

The motor is not rotating.

Replace the motor.
Replace the ADF board.

While
scanning
document

The feeder stops the feeding
job while the document is
taken into the feeder.

The malfunction of the sensor.

Replace the sensor.

The motor power is not working
properly.

Replace the motor.
Replace the ADF board.

The roller is dirty.

Clean the roller.

The roller is worn out.

Replace the roller.

The document is stuck and
gets damaged while taken
into the feeder.

Foreign objects entered the feed
area.

Remove the objects.

The paper quality is not
acceptable.
The paper shape is not
acceptable.

Recommend the customer to use
the document glass.

Sensor Malfunctions

Symptom

Possible Cause

Countermeasure

While
feeding a
document

No beep sound when you
place the document.
(The beep sound volume
setting could be OFF.)

DS1 sensor defect

0 Press <Mode>, <*>, <2>, <2> to display the sensor

input test mode.

1 Confirm the LCD indication changes by moving the

DS1 sensor.

OFF: No document / ON: Document
2 Check the sensor harness is firmly connected.
3 If the LCD indication does not change, replace the

DS1 sensor.

4 Replace the sensor harness.
5 Replace ADF board.
6 Replace the harness between ADF board and main

control board.

7 Replace the main control board.

APS sensor defect

0 Press <Mode>, <*>, <2>, <2> to display the sensor

input test mode.

1 Confirm that the LCD indication changes by opening

and closing the platen cover.

OFF: Cover Open / ON: Document
2 Check the sensor harness is firmly connected.
3 If the LCD indication does not change, replace the

APS sensor.

4 Replace the sensor harness.
5 Replace ADF board.
6 Replace the harness between ADF board and main

control board.

7 Replace the main control board.

The machine feeds the
document through the ADF
without scanning.

DS1 or APS sensor
defect

Check “DS1 sensor defect” and “APS sensor defect”.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Search results

Summary of Contents for bizhub 25e

Reviews:

Brands by name

Popular brands

Konica Minolta bizhub 25e, Field Engineering Manual

Search results

Summary of Contents for bizhub 25e

Reviews:

Brands by name

Popular brands