Konica Minolta bizhub 25e Field Engineering Manual Download Page 72

Page: 72 / 353

2-24

Panel board

This board consists of keys, touch panel, LCD, FPGA/MPU controlling the LED, and their peripheral circuits.

Scanner connection board

This board relays signals from ADF to motors, clutches, solenoids, and sensors.

It is controlled by SoC and printer FPGA on the main control board.

Power is not supplied during energy save setting.

Cassette board

This board controls clutches and sensors of the optional cassettes.

It is controlled by printer FPGA on the main control board.

Power is not supplied during energy save mode.

Consumables TAG board

This board mounts a memory to record and control information of the consumables (toner and drum). It is

controlled by SoC (I2C I/F) on the main control board.

Power is not supplied during energy save mode, but the data will not be erased since the memory is non-

volatile.

2bin board

This board relays signals of 2bin motor drive circuit and 2bin paper discharge sensor.

It is controlled by printer FPGA on the main control board.

Power is not supplied during energy save mode.

High-voltate power board

This board generates high-voltage power required for electrophotographic system ; charge, developing,

transfer, and cleaning sections

Power is not supplied during energy save mode.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Search results

Summary of Contents for bizhub 25e

Reviews:

Brands by name

Popular brands

Konica Minolta bizhub 25e, Field Engineering Manual

Search results

Summary of Contents for bizhub 25e

Reviews:

Brands by name

Popular brands