Konica Minolta bizhub 25e, Field Engineering Manual

Page: 183 / 353

3-107
3.30 Printer control parameter mode
The following settings are available for the PDL :
Adjustment Parameter
• Enable PS3 tray setting
• Cassette designation command
• Paper size designation command
027
Change barcode font width 028
Tray number command for PCL 5 044 ~ 048
Tray number command for PCL XL 050 ~ 054
Cerner certification setting 060
Tray number command for PS3 064 ~ 068
1. Press <Mode>, <*>, <5>, <7>.
2. Select [Parameter Edit], and press [Enter].
When you press [Parameter Clear] and then [Yes], all the parameters return to their default value.
3. Call up the desired switch by pressing [Prev] or [Next],or by pressing the numeric keys.
4. Select the desired parameter by pressing the box.
5. Adjust the parameter, and press [Enter].
To navigate through the machine parameter settings:
• The bits are ranged from 7 (left) to 0 (right).
• Press [
] or [ ] of the cursor key to move the cursor.
• Press <0> or <1> on the numeric keys, or [ ] or [ ], to change the bit value.
• Press [Cancel] not to save the setting of the displayed parameter.
6. If you want to set other parameter, repeat step 3-5.