manualshive.com logo in svg

Konica Minolta bizhub 25e, Field Engineering Manual

Share
Download
Konica Minolta bizhub 25e Field Engineering Manual Download Page 191

3-115

3.36 Certification terminal

Enable this setting to use the certification terminal.
1.  Press <Mode>, <*>, <6>, <5>.
2.  Select the terminal type, and press [Enter].

3.37 Service function menu

All the field service modes are available from the menu.
1.  Press <Mode>, <*>, <7>, <7>.
2.  Select the desired service function to use.

3.38 Counter information maintenance

The machine has the counter data saved on both the EEPROM and SD card  with its serial number connect-

ed.  If for some reasons these two serial numbers do not match, maintenance the data manually.

NOTE

The maintenance screen is normally displayed when the machine is turned on.  Follow step 2.  To main-

tenance the data manually, start operation from step 1.

1.  Press <Mode>, <*>, <9>, <3>.
2.  Check both counter data on EEPROM and SD card.
 

To copy the counter data from SD card to EEPROM, press [from SD].

 

To copy the counter data from EEPROM to SD card, press [from EEPROM].

3.  Restart the machine when copying the data has finished.

Summary of Contents for bizhub 25e


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands