Konica Minolta 7020, Instruction Manual

Page: 81 / 266

3-37
1
2
3
Use the Interrupt mode to interrupt copying in progress to perform a simple job.
When interrupt copying is completed, the settings for the initial job restore automati-
cally and the Basic Screen displays.
Interrupt copying is available when the copier is performing the following operations:
• Continuously printing the image stored in memory
• Scanning the originals into memory
• Scanning the originals into memory while printing in Reserve mode
Specifications for Interrupt Mode
❒
The Interrupt mode cannot be selected with the following copier conditions:
The Basic Screen is not displayed.
The Call for Service message displays or a paper misfeed occurs.
❒
Incompatible: Reserve
Press
INTERRUPT
on the control panel.
The
INTERRUPT
LED goes on and SETTING on the Basic
Screen changes to
INTERRUPT
.
Set copy conditions, as desired.
All copying features are compatible except Reserve
mode.
The settings in Interrupt mode are as follows.
Copy Mode : 1
s
1
RADF : ON
AE : ON
Lens Mode : 1.00 (100%)
APS : ON
Print Quantity : 1
Finisher : Exit tray 1 in Sort mode
Position original(s).
HINTS
The timing to enter the Inter-
rupt mode varies according to
the job in progress on the ma-
chine when
INTERRUPT
is pressed.
See the following page.
In Reserve mode, pressing
INTERRUPT
before the copier fin-
ishes scanning the reserve job
originals clears the settings
selected for the reserve job.
For details of Reserve mode,
see p. 3-23 to p. 3-24.
HINTS
HINTS
See p. 3-2 to p. 3-6 for details
on positioning originals.
Remove any document from
the platen glass or from the
document feeder, if present.
Interrupt Copying
3
Copying
Operations
Paper Size
Setting
Print Quantity
Positioning
Originals
2
s
1
Using
Memory
FS-107
Output Modes
Output without
Finisher
Lens Mode
Density
1
s
2, 2
s
2
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode