Konica Minolta 7020 Instruction Manual Download Page 75

Page: 75 / 266

3-31

Select the desired staple position.

Touch to highlight the desired staple position key
on the Staple Position Selection Screen.

Touch

The Output Mode Screen will be restored.

Touch

The Basic Screen will be restored.

Select additional copy conditions, as
desired.

Enter the desired print quantity from
the control panel keypad.

Position original(s).

Press

START

The finisher mode icon (Stack:
None, Sor t:

, Group:

Staple:

) or staple position

icon appears/disappears in
the message area of the
screen to indicate the selected
output mode.

See p. 9-3 to be sure that the
finisher capacity is not ex-
ceeded.

HINTS

See p. 3-2 to p. 3-6 for details
on positioning originals.

HINTS

Press

STOP/CLEAR

to suspend the

scanning or printing job.

CAUTION

When the finisher exit tray capacity is exceeded
due to the print quantity selected, remove the
copied sets as they exit; otherwise, mishandled
paper will occur.

Output Mode for Machine with Finisher FS-107 (continued)

Copying

Operations

Paper Size

Setting

Print Quantity

Positioning

Originals

Using

Memory

FS-107

Output Modes

Output without

Finisher

Lens Mode

Density

2, 2

IT-101

Output Modes

Check Mode

& Proof Copy

Interrupt

Mode

Summary of Contents for 7020











































































































































































































































































Search results

Summary of Contents for 7020

Reviews:

Brands by name

Popular brands

Konica Minolta 7020, Instruction Manual

Search results

Summary of Contents for 7020

Reviews:

Brands by name

Popular brands