Konica Minolta 7020, Instruction Manual

Page: 175 / 266

8-45
5
Select the desired magnification and
paper size on the Basic Screen.
Enter the desired print quantity from
the control panel keypad.
6
7
Please Be Reminded! Please Be Reminded!
For details on positioning origi-
nal, see p. 3-5.
See p. 3-7 for details on set-
ting print quantity.
HINTS
HINTS
CAUTION
When the finisher exit tray / inner tray / paper
exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.
4
Position originals FACE DOWN on the
platen glass.
• APS and AMS are automati-
cally released, and 1.00
(100%) is selected as a
magnification ratio.
• Copy mode is automatically
set to 1
s
1.
When selecting 1
s
2 mode,
Platen store mode will func-
tion automatically.
DO NOT close the RADF
when Non-Image Area Erase
is selected.
Having Any Problem?
The AUTO layout function may not operate properly if the light-
ing in the work place is directly over the platen glass. In this
case, consult your service centre about an appropriate place
for installation.
Copying Image in the Centre of Copy Paper (AUTO Layout) (continued)
8
Image Insert
OHP
Non-Standard
Size
Flip Side 2
Reverse
Image
Text/Photo
Enhance
Dual Page
Mixed
Original
Folded
Original
Sheet/Cover
Insertion
Application
Selection Screen
Chapter
Combination
Booklet
Repeat
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Non-Image
Area Erase
Stamp
Applications
Press
START
.