Konica Minolta 7020 Instruction Manual Download Page 77

Page: 77 / 266

3-33

Please Be Reminded!

When starting a new copying
job, be sure to close the RADF
securely, then press

AUTO RESET

Output Mode for Machine with Inner Tray IT-101 (continued)

To select Stack mode, dese-
lect all the keys.

Stack mode is initially se-
lected. Key operator can
change the initial output mode
from Stack to E-SORT+ sort
or E-SORT+group. See p. 12-
10.

HINTS

Please Be Reminded!

See p. 9-2 to be sure that the
exit tray capacity is not ex-
ceeded.

See p. 3-7 for details on set-
ting print quantity.

See p. 3-2 to p. 3-6 for details
on positioning originals.

HINTS

Copying

Operations

Paper Size

Setting

Print Quantity

Positioning

Originals

Using

Memory

FS-107

Output Modes

Output without

Finisher

Lens Mode

Density

2, 2

IT-101

Output Modes

Check Mode

& Proof Copy

Interrupt

Mode

Load copy paper.

When using E-SORT + sort or E-SORT + group
mode, load the same paper size into two trays in
different orientation.

Press

OUTPUT

on the control panel.

Select the desired exit tray.

Select the desired output mode.

Touch the desired key on the Output Mode Screen.

Touch

The Basic Screen will be restored.

Select additional copy conditions, as
desired.

Enter the desired print quantity from
the control panel keypad.

Position original(s) FACE UP in the
document feeder or FACE DOWN on the
platen glass.

Summary of Contents for 7020











































































































































































































































































Search results

Summary of Contents for 7020

Reviews:

Brands by name

Popular brands

Konica Minolta 7020, Instruction Manual

Search results

Summary of Contents for 7020

Reviews:

Brands by name

Popular brands