Konica Minolta 7020, Instruction Manual

Page: 10 / 266

viii
• Dual Page
Copy both pages of an open book or book-size sheet separately onto two A4 sheets
in 1
s
1 mode or separately onto each side of one A4 sheet in 1
s
2 mode. You can
use the Dual Page mode with the Front or Front/Back cover mode. The cover page(s)
will be scanned and copied normally before image division is performed on the other
pages.
• Flip Side 2
1-2 Flip Side 2 arranges the even pages of the simplex originals upside down on the
reverse side of duplex copies, this is especially valuable when copying A3 portrait on
to A4.
Similarly, 2-1 Flip Side 2 rearranges the reverse side of duplex originals which reads
upside down to make normal simplex copies.
• Folded Original
This feature sets the RADF to accept folded originals.
• Frame/Fold Erasure
Erase border and/or fold image area using Frame (1 - 15mm), Fold (1 - 30mm), or
Frame & Fold.
• Image Insert
Store pages in memory from the platen glass, and insert the pages into a document
copied from the document feeder.
• Image Rotation
Before copying, rotate the original image when its portrait/landscape orientation is
different from the copy paper orientation.
• Image Shift
Create or remove a binding margin (shift amount from –250 ~ +250mm in 1mm
increments); reduce image to prevent image loss (reduce & shift amount from –250
~ +250mm in 1mm increments).
• Interrupt Copying
Interrupt copying-in-progress to perform an urgent copy, using any of the copier fea-
tures for the interrupt job.
• Job List Confirmation
Display on the LCD the current machine status and the list of jobs stored ready for
copying.
• Job Memory
Program up to 15 jobs and recall each job by job number or name, as needed. All
compatible platen glass functions can be programmed into Job Memory directly after
they are selected.
• Lens Mode (RE, Zoom)
Select Fixed ratios, three reduction and three enlargement ratios.
Zoom ratios can be selected from 25% ~ 400% in 1% increments.
• Magnification
Set user-programmable ratios under User Set 1, User Set 2 and User Set 3.
Features of the Machine