Konica Minolta 7020 Instruction Manual Download Page 154

Page: 154 / 266

8-24

Touch

The Application Selection Screen will be restored.

6
7

Touch

on the Application

Selection Screen.

The Basic Screen will be restored.

Enter the desired print quantity from
the control panel keypad.

Position mixed originals FACE UP in the
document feeder.

Press

START

• APS mode is automatically

selected to copy each origi-
nal size to a matching paper
size in 1:1 mode. Change
magnification manually, if
desired.

• To select AMS, touch the

tray key on the Basic Screen
to select the desired paper
size.

HINTS

See p. 3-7 for details on set-
ting print quantity.

• For details on positioning

originals, see p. 3-3.

• Use RADF store mode (p. 3-

21 to p. 3-22) when the origi-
nal count exceeds 50.

Touch

Mixed Original

on the Special

Original Screen.

CAUTION

When the finisher exit tray / inner tray / paper
exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.

Copying Mixed Size Originals (Mixed Original) (continued)

Summary of Contents for 7020











































































































































































































































































Search results

Summary of Contents for 7020

Reviews:

Brands by name

Popular brands

Konica Minolta 7020, Instruction Manual

Search results

Summary of Contents for 7020

Reviews:

Brands by name

Popular brands