Konica Minolta 7020, Instruction Manual

Page: 54 / 266

3-10
1
See the table on the following
page for the relation of origi-
nal size, copy paper size, and
magnification ratio automati-
cally selected.
HINTS
2
3
4
5
HINTS
If copying in 1.00 (100%) mag-
nification mode with specify-
ing a paper size is desired, see
p. 3-12.
See p. 3-7 for details on set-
ting print quantity.
• See p. 9-5 to p. 9-6 for pa-
per sizes detectable from the
RADF or on the platen glass.
• See p. 3-2 to p. 3-6 for de-
tails on positioning originals.
HINTS
HINTS
Copy result may not be satis-
factory due to the Rotation
function. In this case, set the
function OFF manually. See. p.
7-9 to p. 7-10.
Selecting Paper Size (continued)
■
To Specify Desired Paper Size (AMS)
When a paper size is specified on the touch screen, an
appropriate ratio will be selected automatically accord-
ing to the original size detected from the RADF or the
platen glass.
Touch a tray key on the Basic Screen
to select the desired paper size.
Selected tray key will be highlighted, and
–A–
under the LENS indication will also be highlighted.
Select additional copy conditions, as
desired.
Enter the desired print quantity from
the control panel keypad.
Position original(s).
Press
START
.
Scanned image will be printed on the specified
paper size in the magnification ratio automatically
selected.