Konica Minolta 7020, Instruction Manual

Page: 103 / 266

5-11
■
When
-Memory full- Start =>START key
Displays
Cancel => ST/CL key
Wait until the current operation is
completed.
The machine stops copying after producing one
copied set irrespective of the set print quantity.
When scanning in Store mode, however, the
machine stops without producing a copied set.
At this time, all the data still remains in memory.
Press
START
to continue copying.
The machine will output the scanned data for job
completion in the amount remaining in the print
quantity setting.
1
2
The following message displays.
If continuous working
check output after copying
All the data in memory will be erased with this
message displayed.
Check the original pages, then press
START
to complete the job.
Check pages of the discharged set to confirm the
amount of missing data, then complete the job
according to the print quantity remaining.
3
4
To suspend the job:
Press
STOP/CLEAR
to save the job
settings. All scanned data will
be erased.
Or, press
AUTO RESET
to clear the
job and resume initial settings.
When “Memory Full” Message Is Displayed (Memory Overflow) (continued)
5
Clearing
Mishandled
Paper
Call for
Service
Preventive
Maintenance
Power OFF/ON
Screen
Copying Hints
JAM Key
ADD PAPER
Key
Memory
Overflow
Trouble-
shooting