Konica Minolta 7020, Instruction Manual

Page: 229 / 266

12-15
12
Panel
Contrast
Paper Type
Power Save
Memory
Switch
Application
Customize
List Print
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment
Density Shift
KRDS Host
Key Operator
Mode
System Initial
Preset Key
Copier Initial
EKC
Lock Job
Memory
Key Operator
Mode
[4] EKC (Electronic Key Counter)
This setting can only be accessed by the key operator after an 8-digit EKC master
key code is entered.
The EKC stores up to 128 EKC passwords, each of which represents a separate
account that can be used for billing and recordkeeping. The number of users as-
signed to each EKC password may depend upon the billing system in operation and
the number of individuals and departments using the copier. When the EKC is acti-
vated, copying can be performed only after a valid 5-digit EKC password is entered.
The following EKC settings can be made:
1. Change E.K.C. Data:
Create up to 128 individual EKC passwords, 00000~99999, and limit copy count for
each password to a max. 999,999 copies.
2. E.K.C. Data List:
Display the copy count for each EKC password, and change limit settings.
3. All Counter Reset:
Clear the copy count for all passwords.
4. E.K.C. On/Off Setting:
Select the function to be on or off. The initial setting is Off.
5. Copy Limit Reached Effect:
Set the machine condition when the copy limit is reached. The machine can be set to
stop immediately or after a job is completed, or to only display a warning message.
■
How to Access the EKC Setting Mode
Procedure
1 Touch
4. E.K.C.
on the Key Operator Mode Screen. The EKC Master Key Code Screen
displays, if a code is required.
2 Use the keypad on the touch screen to enter your 8-digit EKC master key code, then
touch OK to display the EKC Setting Menu Screen. (See note.)
3 Select the desired EKC function, and make settings, as required.
To exit the EKC mode, touch RETURN on the EKC Setting Menu Screen.
4 To exit the Key Operator mode, touch
RETURN
on the Key Operator Mode Screen to
restore the Basic Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.