Konica Minolta 7020, Instruction Manual

Page: 236 / 266

12-22
[5] Lock Job Memory
Use this function to lock/unlock or delete a Job that has been programmed.
A locked job is indicated by a lock icon ( ) on the job number of the Job Selection
Screen.
The settings of a locked job cannot be changed.
Procedure
1 Touch
5. Lock Job memory
on the Key Operator Mode Screen to display the Job
Memory Lock/Delete Screen.
2 To lock or unlock a job memory, operate the procedure below.
(1) Use
▲
Upper arrow and
▼
Lower arrow keys on the right in the Job Memory
Lock/Delete Screen to scroll to the job to be locked/unlocked.
(2) Touch the desired job number key to highlight it.
(3) Touch
Job Lock
. The job to be locked will display the lock icon in the job number.
The previously locked job will be unlocked and the lock icon will disappear.
3 To delete a job memory, operate the procedure below.
(1) Use
▲
Upper arrow and
▼
Lower arrow keys on the right in the Job Memory
Lock/Delete Screen to scroll to the job to be deleted.
(2) Touch the desired job number key to highlight it.
(3) Touch
DEL . Programs and the name will be deleted from the job memory.
NOTES:
• A locked job can also be deleted, with the lock on the job number released at the same time.
• Once deleted, the programs cannot be restored.
4 Touch
RETURN
to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.