Konica Minolta 7020, Instruction Manual

Page: 235 / 266

12-21
12
Panel
Contrast
Paper Type
Power Save
Memory
Switch
Application
Customize
List Print
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment
Density Shift
KRDS Host
Key Operator
Mode
System Initial
Preset Key
Copier Initial
EKC
Lock Job
Memory
Key Operator
Mode
[4] EKC (Electronic Key Counter) (continued)
■
5. Copy Limit Reached Effect
Use this function to select whether the copier will stop when the count limit is reached,
or if the copier will complete the copy job before stopping when reaching maximum
copy count.
❒
Default setting: After job
Procedure
1 Touch 4. E.K.C. on the Key Operator Mode Screen. Enter an 8-digit EKC master key
code, then touch
OK
to display the EKC Setting Menu Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
2 Touch
5. Copy Limit Reached effect
to display the Copy Limit Reached Effect Screen.
3 Select setting option:
Touch
Immediately
to stop the copier when the copy limit is reached.
In this case, the paper in process will be completed, and the message “Enter EKC
password” will display after the copier stops.
Touch
After job
to stop the copier after the current job is completed.
Touch Warning only to display a warning message when copy limit is reached.
4 Touch
OK
to complete the settings and return to the EKC Setting Menu Screen.
5 Touch
RETURN
to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.