Konica Minolta 7020, Instruction Manual

Page: 119 / 266

7-3
2
3
4
Enter the password.
Enter a 4-digit number timer interrupt password
using the keypad on the control panel.
If an invalid password is en-
tered, continue by entering the
valid 4-digit password.
HINTS
For setting the timer interrupt
password, see p. 12-32.
Press
START
.
The following message will be displayed on the
Basic Screen.
Input copy time is
0 hour(s) 05 minute(s)
Set the hour for the interrupt use.
Enter a 1-digit hour (ex. 3 hours is 3) using the
keypad on the control panel. (0 ~ 9)
Press
START
.
Your copy time is
3 hour(s) 05 minute(s)
Set the minute for the interrupt use.
Enter a 2-digit minute (ex. 7 minutes is 07) using
the keypad on the control panel. (00 ~ 59)
Input copy time is
3 hour(s) 07 minute(s)
Press
START
.
Copying is available until the set time is up.
When timer interrupt of the copier is finished, press
the power switch.
The copier returns to the OFF condition and copy-
ing is again disabled.
5
6
7
Entering a number smaller
than 5 will set the minute at 5.
Programmed Shut Off (Weekly Timer)
7
Rotation
Touch
Screens
Programmed
Shut Off
V/H Zoom
Advanced
Information