Konica Minolta 7020, Instruction Manual

Page: 118 / 266

7-2
1
The Weekly timer function manages a copier to be turned on and off at the time
specified by the key operator to disable copying during off time.
This function is not factory-set.
When a copier is under control of the weekly timer function, the following message
will be displayed after pressing the power switch, and copying is unavailable.
ex. Timer interrupt mode
Enter password
or
Input copy time is
0 hour(s) 05 minute(s)
Copying will be available by following procedure.
Press the power switch.
The Basic screen will be displayed along with the
message shown below.
Timer interrupt mode
Enter password
The timer interrupt password is not factory set and
must be entered by the key operator.
In the event the timer interrupt password has not
been entered by the key operator, the following
message will display instead.
Input copy time is
0 hour(s) 05 minute(s)
When the above message displays, proceed to
step
4
.
The machine power will be
turned off automatically after
5 minutes from this state.
HINTS
For details of the Weekly timer
function, see p. 12-26 to p. 12-
32.
Programmed Shut Off (Weekly Timer)