manualshive.com logo in svg

Konica Minolta 7020, Instruction Manual

Share
Download
Konica Minolta 7020 Instruction Manual Download Page 16

1-2

CAUTION

Burns or injury may occur from touching the areas detailed in the caution
labels and caution indicators. Do not remove caution labels or indicators. If
any caution label or caution indicator is soiled, please clean to make leg-
ible. If you cannot make them legible, or if the caution label or indicator is
damaged, please contact your service centre.

The caution labels and indicators are attached to the machine areas, as shown be-
low, where you are advised to pay special attention to avoid any dangerous situa-
tions or serious injury.

Caution Labels and Indicators

 WARNING

This area generates
high voltage.  If
touched, electrical
shock may occur. DO
NOT TOUCH!

 CAUTION

The fixing unit is
very hot.
To avoid getting
burned DO NOT
TOUCH.

Summary of Contents for 7020











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands