manualshive.com logo in svg

Konica Minolta 7020, Instruction Manual

Share
Download
Konica Minolta 7020 Instruction Manual Download Page 106

5-14

COPYING DOES NOT BEGIN AFTER PRESSING START
Insert or adjust the appropriate paper tray for paper size selected.
Close document cover firmly.
Close front door completely.

COPYING DOES NOT RESUME AFTER MISHANDLED PAPER IS REMOVED
Check copier diagram on touch screen for additional indications of mishandled paper.

COPY QUALITY IS POOR
Check paper for dampness, and replace it if necessary.

THE ORIGINAL PAPER IS MISHANDLED OR SKEWED IN THE DOCUMENT
FEEDER
Originals should conform to the recommended size and weight.
Be sure originals are not stapled.
Align originals evenly in the RADF.
Check to make sure paper guides meet the width of mixed size originals.

COPY IMAGE IS SKEWED WHEN BYPASS IS USED
Be sure copy paper is inserted straight.

USING EKC, COPIES CANNOT BE MADE AFTER PASSWORD IS ENTERED
Check to see if the message EXCEEDS LIMIT is displayed.
Contact key operator to reset limit.

FINISHER DOES NOT OPERATE

Press 

OUTPUT

 .

Remove mishandled paper if any exists. Properly close finisher door.

RADF INDICATOR WILL NOT LIGHT AFTER 

AUTO RESET

 IS PRESSED

Fully close RADF.

RADF LIGHT IS FLASHING
The document feeder is ready to accept originals.

Insert originals on RADF tray, press 

AUTO RESET

 , then 

START

 .

ADD TONER MESSAGE IS DISPLAYED
New toner supply is needed. Follow instructions for adding toner.

CALL FOR PM IS DISPLAYED IN MESSAGE AREA
Contact your service centre for Preventive Maintenance.

APS SELECTS THE WRONG PAPER SIZE
RADF paper guides must be adjusted exactly to the size of originals.

Troubleshooting Tips  (continued)

Summary of Contents for 7020











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands