Konica Minolta 7020, Instruction Manual

Page: 246 / 266

12-32
[9] Weekly Timer (continued)
■
5. Password Setting
Use this password setting mode to establish a 4-digit password requirement for us-
ing Timer Interrupt function. The default password of 0000 allows the timer function
to be interrupted without the requirement for password entry.
❒
Default setting: Timer interrupt password 0000
Procedure
1 Touch
9. Weekly Timer
on the Key Operator Mode Screen. Enter your 4-digit Weekly
timer master key code, then touch OK to display the Weekly Timer Setting Menu
Screen.
NOTE:
If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit code.
2 Touch 5. Password setting to display the W.T. Interrupt Password Setting Screen.
3 Input a new 4-digit password using touch panel keypad, and touch
OK
to complete
the setting.
NOTE:
When the password setting is 0000 (factory default setting), timer interrupt can be used simply
by pressing the Power switch.
4 Touch
RETURN
to restore the Weekly Timer Setting Menu Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch
RETURN
to restore the Basic Screen to
perform copying operations.