manualshive.com logo in svg

Konica Minolta 7020, Instruction Manual

Share
Download
Konica Minolta 7020 Instruction Manual Download Page 209

11-3

■

Cleaning the RADF

Never use paint solvents, such
as benzene or thinner, to clean
the RADF platen guide cover.

Never use paint solvents, such
as benzene or thinner, to clean
the RADF roller.

Please Be Reminded!

Please Be Reminded!

Please Be Reminded!

Please Be Reminded!

Cleaning the Left Partition Glass
Keep the glass clean; otherwise soil marks may be cop-
ied, resulting in dark lines on the copies.
Clean the left partition glass with a clean soft cloth.

Cleaning the RADF Platen Guide Cover
The RADF platen guide cover should be kept clean;
otherwise, soil marks may be copied, or the original
size cannot be detected correctly.
Clean the RADF platen guide cover with a clean soft
cloth.

Cleaning the RADF Roller
Clean the RADF roller with a clean soft cloth.
It may also be cleaned with a soft cloth dampened
slightly with water, if it is difficult to be cleaned.

Cleaning Image Scanning Section (continued)

11

Cleaning 

Scanning 

Section

Cleaning 

Priting 

Section

Copy Count

Maintenance

Summary of Contents for 7020











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands