Chapter 6 RA83/84/85/93/94/95 Series
Using The Menu
Operation Manual
To select the menu items, use the following procedures.
(1) Press the MENU key and use the Joystick to select an item. The selected item is
highlighted. Subsequent pressing of the MENU key brings back to the normal
operation.
1) Press the MENU key.
2) Highlight a desired menu by pressing the Joystick.
3) Highlight a desired sub menu or item by pressing the Joystick up or down.
4) Press the ENT key to activate the selection sequence or select the sub menu.
5) Press the Joystick up or down to select a status or parameter of the item
selected. When the parameters are identified with numbers (1:PANEL,
2:MODE, 3:TRUE/REL, etc.) the numerical keypad can also be used for the
selection.
6) Press the ENT key to fix the selection. The highlighted part is removed and its
function becomes effective.
7) Press the Joystick up or down to select the item.
8) Press the ENT key to activate the selection sequence.
9) Press the Joystick up or down to select a status or parameter of the item
selected. When the parameter is numerical, the numerical keypad can be used
for the selection.
10) Press the ENT key to fix the selection.
NOTE:
When you have finished setting the relevant menu functions, exit the menu by
pressing the MENU key to make sure the settings become active.
6.1 RADAR Menu
The RADAR menu includes the setting and display items used for the ordinary radar
operations.
6.1.1
Picture Stabilization
Indication
Meaning Selection
SEA STAB/GND STAB
Stabilizing mode indication
SEA GND (Note)
NOTE 1: The under lined is a default value.
NOTE 2: To change the selection, go to DISP=>SEA STAB/GND STAB.
SEA
(Sea Stabilized mode): The radar picture is stabilized with respect to the water
with signals supplied from a bearing sensor and a water speed sensor. The current
direction (Set) and speed (Drift) are combined in the motion of targets on the screen.
6-2
93142105-02
