Kongsberg Flexview Reference Manual Download

Page: 80 / 160

922-20207001/1.0

Display menu

Use the

Display

menu to control the visual aspects of the system, and to show or hide

various elements in the presentation.

How to open

To open this menu, click the menu title.

Description

•

Enable Target Marker

Click to enable the Target Marker function.
You can press 0–9 to place a marker in the sonar
view that is stamped with time and location
information. In addition, you can export this
information to a serial or UDP port.

•

Delete All Markers

Click to remove all target markers from the sonar
view.

•

Full Screen

Click

Full Screen

to make the sonar view full

screen. Press the

Esc

key to exit full-screen mode.

•

Output Messages window

Click to show or hide the

Output Messages

window. The

Output Messages

window displays

information, diagnostic, and error messages.

•

Playback Console

Click to show or hide the

Playback Console

Control playback using the

Playback Console

. You

can stop, pause, fast forward, or advance through
the recording one ping at a time. You can also
repeat playback of the file on a never-ending loop.

•

Rotator Control

Click to show or hide the

Rotator Control

dialog box for each rotator you have

installed.

•

Tool bar

Click to show or hide the tool bar. The tool bar provides buttons for functions, filters,
and sonar view overlays.

•

Annotations

Click

Annotations

to enable or disable the bearing and range annotations in the sonar

view.

Flexview Reference Manual

Summary of Contents for Flexview

































































































































































Search results

Summary of Contents for Flexview

Reviews:

Related manuals for Flexview

Brands by name

Popular brands

Kongsberg Flexview, Reference Manual

Search results

Summary of Contents for Flexview

Reviews:

Related manuals for Flexview

Brands by name

Popular brands