Kongsberg Flexview Page 46 Reference Manual Download

Page: 46 / 160

922-20207001/1.0

Context

GeoTiff files contain georeferencing information and can be opened in third-party
software, such as Google Earth Pro.

Procedure

Click

Setup

→

Preferences

Fill out the fields in the

GeoTiff Auto Save

section.

To automatically save a GeoTiff file every set number of meters, select
Distance and enter a value. To automatically save a GeoTiff file every set
number of seconds, select Time and enter a value.

To save a cropped GeoTiff image for mosaicking purposes, enter the
percentage to crop.

Press F11 to enable or disable GeoTiff auto save. The status bar will display
“GeoTiff” in green when auto save is enabled.

When GeoTiff autosave is enabled, GeoTiff files will be saved automatically and
continuously based on travel distance or time.

Flexview Reference Manual

Summary of Contents for Flexview

































































































































































Search results

Summary of Contents for Flexview

Reviews:

Related manuals for Flexview

Brands by name

Popular brands

Kongsberg Flexview, Reference Manual

Search results

Summary of Contents for Flexview

Reviews:

Related manuals for Flexview

Brands by name

Popular brands