Kongsberg Flexview, Reference Manual

Page: 58 / 160

56
922-20207001/1.0
c Enter the new IP Address in the table.
Tip
Avoid setting the third octet of the IP Address to a value of 100 or more, as you
may experience periodic drops in traffic. We recommend leaving the third octet
set to the default value (1). For example, xxx.xxx.1.xxx.
d Click
Write to Head
.
Observe that a confirmation dialog box opens.
e Click
Yes
to confirm.
Wait for the write operation to complete.
f Close the
Head Network Setup
dialog box.
3 Click
Setup
→
Disconnect
.
4 Apply the new IP Address to the Sonar Head.
a Power off the Sonar Head for three seconds, then power it back up.
b If necessary, change the computer’s network adapter address to place it on
the same network as the Sonar Head.
c Click
Setup
→
System Configuration
→
Devices
→
Sonar Setup
.
d Click the
Discover Sonar Heads
button.
The Sonar Head with its updated IP Address should appear in the
Online Sonar
Heads
table.
e Select the Sonar Head in the
Online Sonar Heads
table, then click the
Use
Discovered Head
button.
f Close the
System Configuration
dialog box.
5 Click
Setup
→
Connect
to start the Sonar Head.
Related topics
Defining the IP address on the Sonar Processor network adapter, page 20
Head Network Setup dialog box, page 89
Flexview Reference Manual