Kongsberg Flexview, Reference Manual

Page: 18 / 160

16
922-20207001/1.0
The software starts up using many of the same settings as the last time you used it.
If these settings are acceptable, continue operation. If you wish to alter any of the
settings, see the relevant procedures.
6 Click
Setup
→
Connect
.
The sonar will start pinging automatically once the connection is complete.
Turning off the Flexview
The Flexview is not provided with an on/off switch.
Context
When you do not use the Flexview, turn off the entire system.
Procedure
1 If you are running the sonar, click
Setup
→
Disconnect
in the Flexview software.
2 Switch off the Sonar Processor.
a Close the Flexview software and any third-party software.
b Shut down Windows.
3 Disconnect the power cord leading to the power supply.
Alternatively, switch off the breaker supplying power to the Flexview.
4 Switch off any additional items, such as a sound velocity profiler or display.
If required, refer to the instructions provided by the product’s manufacturer.
Flexview Reference Manual