Kongsberg Flexview, Reference Manual

Page: 19 / 160

922-20207001/1.0
17
Starting normal operation
Topics
Introduction to the basic procedures, page 17
Setting the Sonar Processor to High Performance, page 18
Installing the Flexview software, page 19
Defining the IP address on the Sonar Processor network adapter, page 20
Changing the frequency, page 21
Testing operation of the Sonar Head, page 21
Testing the Sonar Head telemetry, page 23
Introduction to the basic procedures
Once you have powered up the complete Flexview system, and started the Flexview
program, you are ready to start the actual operation.
Observe these brief procedures to familiarize yourself with the basic operation.
When starting up, the Flexview will automatically apply its previous settings. The
procedures are partly provided to get you acquainted with the basic functionality offered
by the Flexview, and partly to set up the Flexview for normal use. If you already know
the current operational settings are acceptable, you may not need to do any of these
procedures.
Getting started