Kongsberg Flexview, Reference Manual

Page: 45 / 160

922-20207001/1.0
43
Related topics
Recording Format, page 76
Saving GeoTiff files
GeoTiff files are TIFF files which have geographic data embedded within them. The
geographic data can then be used to position the image in the correct location and
geometry on the screen.
Prerequisites
• You must have a position and heading sensor connected to your system and
sending data to the Flexview software. To add sensors, click
Setup
→
System
Configuration
→
Devices
→
Sensors Setup
.
• Your Master Reference must be set up to use the sensor inputs or to use a fixed
location by entering Latitude, Longitude, and Heading. To set up the Master
Reference, click
Setup
→
System Configuration
→
Deployment
→
Master Reference
.
• Your mounting offsets must be configured correctly. To configure your mounting
offsets, click
Setup
→
System Configuration
→
Deployment
→
Mounting Offsets
.
• You must be using the appropriate coordinate system for your current location. To
choose your coordinate system, click
Setup
→
Geo Projection
.
Operating procedures