Kongsberg Flexview, Reference Manual

Page: 100 / 160

98
922-20207001/1.0
Details
Add Device
Click this button to add a sensor for data import.
Remove Device
Click this button to remove the selected sensor from the
Sensor Devices
list.
Test Device
Click this button to start a sensor test. The sensor data will be displayed in the
Port Monitor
box.
Device Properties
•
Name
Enter any name into this field to label the device.
•
Protocol
This drop-down lists all supported datagram formats.
•
Port Location
The location of the port receiving external sensor data – can be a COM port,
a UDP Ethernet port, or a port on the Sonar Head.
•
Port#
This drop-down lists the available port numbers. Select the port where the
device is connected.
•
Baud Rate
Specify the baud rate (“speed”) for the serial communication. The standard
baud rate defined for NMEA communication is
4800 .
•
Data Bits
Select the number of data bits for the serial communication.
Note
The standard number of data bits defined for NMEA serial line communication
is 8 (eight).
•
Parity
Specify the parity for the serial communication.
Note
If required, a parity bit is used in a simple error detection algorithm for a serial
port. Standard parity defined for NMEA serial line communication is "None".
Flexview Reference Manual