922-20207001/1.0
49
Procedure
1
Click the
String Measure
button.
This button is located on the tool bar.
2
Click anywhere in the sonar view to start a point.
3
Move to the second point, then click again.
4
Click as many times as necessary to create the required area.
5
Double-click on the last point to finish.
The area will automatically be closed, and a rectangular label will appear providing
information about the area and perimeter.
6
Move the label to a position on the screen where it is most legible, then click the
left mouse button to place it.
Tip
To remove this overlay, click the
Wiper
button, then click the overlay.
Related topics
Placing text labels
The text label tool allows you to place comments on the screen.
Prerequisites
Text labels will not appear on sonar data recordings. To place a text overlay on a
recording, click
Setup
→
Preferences
and fill out the
Overlay Text
boxes.
Procedure
1
Click the
Text Label
button.
This button is located on the tool bar.
2
In the sonar view, click the area of interest that you want to label.
3
Click and hold the left mouse button on the label overlay and drag it to a place
on the screen where the text is legible.
4
Label the area of interest.
a
Double-click on the label overlay to open an
Edit Text Box
dialog box.
b
Enter the desired text into the dialog box.
c
Click
OK
when done.
5
If the text you entered does not fit within the text label overlay, you can resize the
label by clicking on the label border, then dragging it to create a larger label.
Summary of Contents for Flexview
