Kongsberg Flexview, Reference Manual

Page: 149 / 160

922-20207001/1.0
147
It is important to make sure that the chosen computer model is relatively new with
sufficient processing power, a high performance graphic adapter, and a high speed
network adapter.
We recommend a computer with a CPU that has a PassMark Software benchmark score
of 10,000 or more (
passmark.com ).
PassMark Software is a Windows computer performance benchmarking utility.
Computers with a CPU score of 10,000 or higher have been tested with the Flexview.
Lower-scoring computers may not perform well, resulting in a slow GUI response,
slower ping rates, or dropped pings.
The computer must be able to facilitate the various interface requirements made by the
Flexview, and you may need to add extra Ethernet and serial adapters.
Note
The computer design and construction must allow for maritime use, easy access to
connectors, parts and cables, and a safe installation.
The minimum technical requirements are:
•
Processor
: 2.80 GHz, Intel quad core i7
•
Memory
: minimum 8 GB
•
Hard disk
: minimum 500 GB
•
Graphics card RAM
: 256 MB
•
Network interface
: 100/1000 Mbps
•
Serial interfaces
: One or more serial line interfaces are required. The number of serial
lines depends on the interface requirements.
•
Operating system
: The Flexview software has been designed for the Microsoft ® 64-bit
Windows 10 operating system. Windows 7 is supported for imaging applications
only. Profiling applications will not work properly in Windows 7. Operating systems
older than Windows 7 are not supported.
Technical specifications