922-20207001/1.0
65
Status bar
The status bar is located at the bottom of the Flexview presentation. It allows you to
view the system status and disk space. If network logging is enabled, you can view the
sonar connection performance. You can also access detailed telemetry info.
A
Recording information
Displays the filename when you are recording data.
B
Time synchronization status
Displays the status of the time synchronization process if
Host
Time Sync
Mode is enabled. “Syncing” displays during time synchronization (which takes
approximately two minutes). “Sync OK” displays when time synchronization is
complete. “Sync Error” displays if the computer clock is irregular (for example,
due to interference from the time source). In this case, restart the synchronization
process by disconnecting, then reconnecting, the Sonar Head.
C
Sound Speed
The sound speed is displayed in green (after filtering and thresholding). This text
will display in blue during playback if
Override Sound Speed
is enabled.
D
GeoTiff
If GeoTiffs are automatically being created, then this text will display in green.
E
Disk space monitor
Displays the percentage of hard drive space you have available for data recordings.
F
System status
Shows the system status, such as “Active” when the system is connected to a Sonar
Head, “Inactive” when not connected, or “Playback” when replaying a recorded
file. Clicking the system status text will open a
Connection Status
window. You can
click on
Flexview Sonar
in the
Connection Status
window to open a
Head Status
window showing telemetry information.
G
Sonar connection performance
If network logging is enabled in the
System Configuration
dialog box, then the ping
loss, packet loss, and the last ping data rate will be displayed.
Summary of Contents for Flexview
