Kongsberg Flexview, Reference Manual

Page: 74 / 160

72
922-20207001/1.0
Sonar Applications menu
The
Sonar Applications
menu lists various operating modes used for different
applications. Each mode has its own pre-defined characteristics, such as differing ranges,
angular resolutions, and pulse types.
Note
You cannot select a sonar application until the Sonar Head is connected. All
Sonar
Applications
menu items will be greyed out until the sonar is running.
How to open
To open this menu, click the menu title.
Description
•
EIQ (500-kHz transducer only)
This sonar application captures high-quality images.
At short ranges the images are relatively insensitive
to the motion of the sonar. At longer ranges the
sonar should be relatively motionless.
Note
This application is less sensitive to motion than EIQ
- Fine.
•
EIQ - Fine (500-kHz transducer only)
This sonar application captures very high-quality images. At short ranges the images
are relatively insensitive to the motion of the sonar. At longer ranges the sonar should
be relatively motionless.
•
Ethernet Test - 100Mbps
You can test your 100-Mbps link to make sure that the link throughput is available.
The test uses 95 percent utilization.
•
Ethernet Test - 10Mbps
You can test your 10-Mbps link to make sure that the link throughput is available.
The test uses 95 percent utilization.
•
Imaging
You can use this sonar application for navigation and obstacle avoidance. This
application uses a 30-degree Tx vertical beamwidth.
•
Imaging Enhanced
Use this sonar application for imaging or obstacle avoidance using one of the
eIQ elements. This application uses a Time Delay FFT beamformer to produce a
high-quality image.
Flexview Reference Manual