Kongsberg Flexview, Reference Manual

Page: 122 / 160

120
922-20207001/1.0
Details
Head
The
Head
table shows you the serial number and IP Address of the Sonar Head.
Configuration file
Click the folder icon to browse for the latest configuration file on your local drive.
Click the
Load from file
button to populate the
Production Configuration
fields
with values from your configuration file.
To save the current parameters, locate the field at the bottom of the dialog box
and choose a filename or browse to replace an existing file. Click the
Save to file
button beside this field.
Production Configuration
This table lists all the advanced parameters and their values for the Sonar Head.
Write Config
Click this button to re-program the Sonar Head with the parameters displayed
in the
Production Configuration
table.
Read Config
Click this button to populate the
Production Configuration
fields with the current
parameter values (values are read from the Sonar Head).
Program Head dialog box - Head Corrections page
You can perform advanced tasks in the
Program Head
dialog box, such as configuring
production settings, making head corrections, or changing transmit pulse definitions.
How to open
This dialog box is opened from the
Advanced
menu.
Note
This dialog box is only available when the Sonar Head is connected and paused. To
pause the Sonar Head, click
Setup
→
Connect
, then open the Menu Widget in the top-right
corner of the sonar view. Click
Pause
.
Select the
Head Corrections
tab.
Flexview Reference Manual