Kongsberg Flexview, Reference Manual

Page: 143 / 160

922-20207001/1.0
141
•
Kongsberg EM Attitude 3000
The EM Attitude 3000 is a proprietary datagram format created by Kongsberg for use
with digital motion sensors. It holds roll, pitch, heave and heading information. The
datagram contains a 10-byte message.
•
Octans STD1
This is a third-party proprietary datagram format for heading, speed, and motion. It
was created by iXSea (
http://www.ixblue.com ) for use with their Octans gyrocompass.
Supported datagram formats for motion information
The Flexview supports the following datagram formats from a motion sensor.
•
Teledyne TSS1
Teledyne/TSS1 is a proprietary datagram format for heave, roll and pitch
compensation. When you select this protocol, the number of sensor variables is fixed,
and there is no token associated with it.
•
Kongsberg EM Attitude 3000
The EM Attitude 3000 is a proprietary datagram format created by Kongsberg for use
with digital motion sensors. It holds roll, pitch, heave and heading information. The
datagram contains a 10-byte message.
•
Octans STD1
This is a third-party proprietary datagram format for heading, speed, and motion. It
was created by iXSea (
http://www.ixblue.com ) for use with their Octans gyrocompass.
Supported datagram formats for sound speed sensors
The Flexview supports the following datagram format from a sound speed sensor.
•
Valeport
This is a third-party proprietary datagram format created by Valeport Ltd. for use
with their sound velocity sensors. The file format is ASCII. There are three formats:
standard format (millimetres per second), alternative format #2 (metres per second
with two decimal places), and alternative format #3 (metres per second with three
decimal places). For more information, see
http://www.valeport.co.uk .
Supported datagram formats for depth information
The Flexview supports the following datagram formats for depth output.
•
NMEA DBT
The NMEA DBT datagram provides the current depth under the transducer. In new
designs, this datagram is frequently used to replace the DBK and DBS datagrams.
•
NMEA DPT
The NMEA DPT datagram provides the water depth relative to the transducer, and
the offset of the measuring transducer.
Technical specifications