922-20207001/1.0
21
Changing the frequency
If you have a high-frequency Flexview transducer, you can change the frequency using
the
Display Widget
.
Context
There are transducers with varying frequencies available for the Flexview.
Note
The frequency buttons will not appear if you are using a 500 kHz transducer. In addition,
these buttons will not appear in playback mode.
Procedure
1
Click the
Display Widget
icon.
This icon is located in the
lower-right corner of the sonar
view.
2
Click one of the buttons to select
a frequency (in kHz).
3
Click the
Display Widget
icon to
hide the widget.
Note
You cannot select a sonar
application or change the range
until you connect to a Sonar Head
(Click
Setup
→
Connect
).
Testing operation of the Sonar Head
You can test the operation of the Sonar Head by confirming that sonar data is being
correctly displayed in the
Information Widget
and sonar view. In addition, any errors will
be displayed in the
Output Messages
or
Head Status
windows.
Prerequisites
The Flexview software must be running.
Tip
Make sure there is sufficient disk space available to complete the survey.
Summary of Contents for Flexview
